PICKLING AND GALVANIZING PLANT
ACID PICKLING PLANT LINES:
Acid pickling lines removes the scale and oxides from the sheets
and strip metal by use of acid.
The types of acid depends on the material being processed,
which are Continuous, Semi-Continuous and Push-Pull type lines.
For High production of Strip ranging in thickness from
1.23 mm (0.48 in.) to a maximum of 6.41 mm ( 0.250 in.),
Continuous lines are used. In these lines Strip accumulators allow
coils to be loaded and unloaded while the strip continues to run
through the pickling section.
When processing Strip with thicknesses between 1.53 mm
( 0.060 in.) and 16.0 mm (0.625 in.),Semi-Continuous and
Push-Pull lines are used.
HOT DIP GALVANIZING PLANT LINES:
Hot-Dip Galvanizing Lines to deposit a wide range of
surface coating onto Steel strip and sheet is to be rolled
or pressed formed, Steel wires, Tubes,Octagonal and
High mast poles, etc.
Hot-Dip is horizontal or vertical non-oxidizing type furnaces.
The furnaces can be sized purely toprovide a clean surface for
optimum adhesion of Zinc coating.
Galvanizing Furnaces can be supplied for continuous or
Batch Galvanizing of Coils, Sheets,Steel wires, Tubes,
Octagonal and High mast poles, etc.
These Furnaces are Electric, Gas and Oil Fired with temperature
control and mechanized.
The system have handling of Materials, Controls, Annealing
Units and also Cleaning range.
Furnaces are with High - Temperature Circulators,
Molten Metal Pumps etc.
HOT DIP GALVANIZING PLANT FOR
GALVANISING POLES AND HIGH MAST:
* * MAXIMUM PLANT DIMENSIONS:
* LENGTH : 12,500 MM
* WIDTH : 1,500 MM
* DEPTH : 1,250 MM
WE SUPPLY COMPLETE HOT DIP GALVANISING PLANT LINES
AND PICKLING PLANT LINES AS REQUIRED SIZES, DIMENSIONS,
SPECIFICATIONS AND DRAWINGS.
|
|
